Suchergebnis: Katalogdaten im Herbstsemester 2022

Maschineningenieurwissenschaften Bachelor Information
Bachelor-Studium (Studienreglement 2010)
Fokus-Vertiefung
Design, Mechanics and Materials
Fokus-Koordinatorin: Prof. Kristina Shea
Für die erforderlichen 20 KPs der Fokus-Vertiefung Design, Mechanics and Materials sind alle aufgeführten Fächer frei wählbar. Empfohlene Fächer sind gekennzeichnet. Falls Sie einen Kurs auf Masterlevel besuchen möchten, müssen Sie dafür das Einverständnis des zuständigen Dozenten einholen.
NummerTitelTypECTSUmfangDozierende
151-0364-00LStrukturlabor Information Belegung eingeschränkt - Details anzeigen
Number of participants limited to 24.
W+4 KP5AM. Zogg, P. Ermanni
KurzbeschreibungTeams mit 2 - 3 Studenten müssen eine möglichst leichte Struktur, welche den gestellten Anforderungen genügt, entwerfen, dimensionieren und herstellen. Ein Flugzeug-Flügelholm-Prototyp und später ein zweiter verbesserter Holm werden getestet und im Hinblick auf konstruktive und strukturmechanische Aspekte beurteilt.
LernzielDie Fähigkeiten zu entwickeln, häufig vorkommende Problemstellungen der Strukturmechanik am Beispiel einer realen Anwendung zu verstehen und zu lösen. Weitere wichtige Ziele sind das Gruppendenken und die Gruppenarbeit zu fördern, den Übergang von der Theorie zur Praxis aufzuzeigen und Erfahrungen in verschiedenen leichtbaurelevanten Bereichen wie, Konstruktion CAE-Methoden sowie die Strukturversuchstechnik zu sammeln
InhaltJede Gruppe (2-3 Studierende) bekommt die Aufgabe einen Flugzeug-Flügelholm, eine typische Leichtbaukonstruktion, zu realisieren. Die Aufgabenstellung beinhaltet Angaben über Lasten und Randbedingungen.

Wichtige Meilensteile der Projektarbeit sind:
- Konzept, Vordimensionierung (Handrechnung) und
Konstruktionsentwurf
- Nachweisrechnung (FEM) und analytische Beurteilung kritischer Stellen
- Fertigung und Prüfung eines Prototypen im Labor
- Fertigung und Prüfung eines verbesserten Bauteils im Labor
- Kostenabschätzung
- Abgabe des Schlussberichtes

Die Projektarbeit wird durch ausgewählte Lehreinheiten unterstützt
Skriptes werden Unterlagen zu ausgewählten Themen abgegeben
151-3207-00LLeichtbauW+4 KP2V + 2UP. Ermanni, T. Tancogne-Dejean, M. Zogg
KurzbeschreibungDie Wahlfachvorlesung Leichtbau umfasst Berechnungsmethoden für die Analyse des Trag- und Versagensverhaltens von Leichtbaustrukturen sowie Bauweisen und Gestaltungsprinzipien von Leichtbaukonstruktionen.
LernzielDie Lehrveranstaltung bezweckt, fundierte Grundlagen zum Verständnis und zur Auslegung und Dimensionierung von modernen Leichtbaukonstruktionen im Maschinen-, Fahrzeug- und Flugzeugbau zu vermitteln.
InhaltLeichtbaukonstruktionen
Dünnwandige Träger und Konstruktionen
Instabilitätsverhalten dünnwandiger Konstruktionen
Versteifte Schalenkonstruktionen
Krafteinleitung in Leichtbaukonstruktionen
Verbindungstechnik
Sandwich Konstruktionen
SkriptSkript, Handouts, Übungen
151-3213-00LIntegrative Ski Building Workshop Belegung eingeschränkt - Details anzeigen
Number of participants limited to 12.

To apply, please send the following information to Link by 31.08.2022: Letter of Motivation (one page) , CV, Transcript of Records.
W+4 KP9PK. Shea
KurzbeschreibungThis course introduces students to engineering design and fabrication by building their own skis or snowboard. Theoretical and applied engineering design skills like CAD, analysis and engineering of mechanical properties, 3D printing, laser cutting and practical handcrafting skills are acquired in the course.
LernzielThe objectives of the course are to use the practical ski/board design and building exercise to gain hands-on experience in design, mechanics and materials. A selection of sustainable materials are also used to introduce students to sustainable design. The built skis/board will be mechanically tested in the lab as well as together out in the field on a ski day and evaluated from various perspectives. Students can keep their personal built skis/boards after the course.
InhaltThis practical ski/board design and building workshop consists of planning, designing, engineering and building your own alpine ski or snowboard. Students learn and execute all the needed steps in the process, such as engineering design, CAD, material selection, analysis of the mechanical properties of a composite layup, fabrication, routing wood cores, 3D printing of plastic protectors, milling side walls from wood or ABS plastic, laying up the fibers from carbon, glas, basalt or flax, laminating with resins, sanding and finishing, as well as laser engraving and veneer wood inlays.
Skriptavailable on Moodle
Voraussetzungen / BesonderesWillingness to engage in the practical building of your ski/board also beyond the course hours in the evening.
151-0509-00LAcoustics in Fluid Media: From Robotics to Additive Manufacturing
Note: The previous course title until HS21 "Microscale Acoustofluidics"
W4 KP3GD. Ahmed
KurzbeschreibungThe course will provide you with the fundamentals of the new and exciting field of ultrasound-based microrobots to treat various diseases. Furthermore, we will explore how ultrasound can be used in additive manufacturing for tissue constructs and robotics.
LernzielThe course is designed to equip students with skills in the design and development of ultrasound-based manipulation devices and microrobots for applications in medicine and additive manufacturing.
InhaltLinear and nonlinear acoustics, foundations of fluid and solid mechanics and piezoelectricity, Gorkov potential, numerical modelling, acoustic streaming, applications from ultrasonic microrobotics to surface acoustic wave devices
SkriptYes, incl. Chapters from the Tutorial: Microscale Acoustofluidics, T. Laurell and A. Lenshof, Ed., Royal Society of Chemistry, 2015
LiteraturMicroscale Acoustofluidics, T. Laurell and A. Lenshof, Ed., Royal Society of Chemistry, 2015
Voraussetzungen / BesonderesSolid and fluid continuum mechanics. Notice: The exercise part is a mixture of presentation, lab sessions ( both compulsary) and hand in homework.
KompetenzenKompetenzen
Fachspezifische KompetenzenKonzepte und Theoriengeprüft
Verfahren und Technologiengeprüft
Methodenspezifische KompetenzenAnalytische Kompetenzengeprüft
Entscheidungsfindunggefördert
Medien und digitale Technologiengefördert
Problemlösunggeprüft
Projektmanagementgefördert
Soziale KompetenzenKommunikationgeprüft
Kooperation und Teamarbeitgeprüft
Kundenorientierunggefördert
Menschenführung und Verantwortunggefördert
Selbstdarstellung und soziale Einflussnahmegeprüft
Sensibilität für Vielfalt gefördert
Verhandlunggefördert
Persönliche KompetenzenKritisches Denkengeprüft
Integrität und Arbeitsethikgeprüft
Selbststeuerung und Selbstmanagement geprüft
151-0524-00LContinuum Mechanics IW4 KP2V + 1UA. E. Ehret
KurzbeschreibungThe lecture deals with constitutive models that are relevant for the design and analysis of structures. These include anisotropic linear elasticity, linear viscoelasticity, plasticity and viscoplasticity. The basic concepts of homogenization and laminate theory are introduced. Theoretical models are complemented by examples of engineering applications and experiments.
LernzielBasic theories for solving continuum mechanics problems of engineering applications, with particular focus on constitutive models.
InhaltAnisotropic elasticity, Linear elastic and linear viscous material behavior, Viscoelasticity, Micro-macro modelling, Laminate theory, Plasticity, Viscoplasticity, Examples of engineering applications, Comparison with experiments
Skriptyes
151-0544-00LMetal Additive Manufacturing - Mechanical Integrity and Numerical AnalysisW4 KP3GE. Hosseini
KurzbeschreibungAn introduction to Metal Additive Manufacturing (MAM) (e.g. different techniques, the metallurgy of common alloy-systems, existing challenges) will be given. The focus of the lecture will be on the employment of different simulation approaches to address MAM challenges and to enable exploiting the full advantage of MAM for the manufacture of structures with desired property and functionality.
LernzielThe main objectives of this lecture are:
- Acknowledging the possibilities and challenges for MAM (with a particular focus on mechanical integrity aspects),
- Understanding the importance of material science and metallurgical considerations in MAM,
- Appreciating the importance of thermal, fluid, mechanical and microstructural simulations for efficient use of MAM technology,
- Using different commercial analysis tools (COMSOL, ANSYS, ABAQUS) for simulation of the MAM process.
Inhalt- Introduction to MAM (concept, application examples, pros & cons),
- Powder-bed and powder-blown metal additive manufacturing,
- Thermo-fluid analysis of additive manufacturing,
- Continuum-based thermal modelling and experimental validation techniques,
- Residual stress and distortion simulation and verification methods,
- Microstructural simulation (basics, analytical, kinetic Monte Carlo, cellular automata, phase-field),
- Mechanical property prediction for MAM,
- Microstructure and mechanical response of MAM material (steels, Ti6Al4V, Inconel, Al alloys),
- Design for additive manufacturing
- Artificial intelligence for AM
Exercise sessions use COMSOL, ANSYS, ABAQUS packages for analysis of MAM process. Detailed video instructions will be provided to enable students to set up their own simulations. COMSOL, ANSYS and ABAQUS agreed to support the course by providing licenses for the course attendees and therefore the students can install the packages on their own systems.
SkriptHandouts of the presented slides.
LiteraturNo textbook is available for the course (unfortunately), since it is a dynamic and relatively new topic. In addition to the material presented in the course slides, suggestions/recommendations for additional literature/publications will be given (for each individual topic).
Voraussetzungen / BesonderesA basic knowledge of mechanical analysis, metallurgy, thermodynamics is recommended.
KompetenzenKompetenzen
Fachspezifische KompetenzenKonzepte und Theoriengeprüft
Verfahren und Technologiengeprüft
Methodenspezifische KompetenzenAnalytische Kompetenzengeprüft
Entscheidungsfindunggeprüft
Problemlösunggeprüft
Persönliche KompetenzenKreatives Denkengeprüft
Kritisches Denkengeprüft
151-3209-00LEngineering Design Optimization Belegung eingeschränkt - Details anzeigen
Number of participants limited to 60.
W4 KP4GK. Shea, T. Stankovic
KurzbeschreibungThe course covers fundamentals of computational optimization methods in the context of engineering design. It develops skills to formally state and model engineering design tasks as optimization problems and select appropriate methods to solve them.
LernzielThe lecture and exercises teach the fundamentals of optimization methods in the context of engineering design. After taking the course students will be able to express engineering design problems as formal optimization problems. Students will also be able to select and apply a suitable optimization method given the nature of the optimization model. They will understand the links between optimization and engineering design in order to design more efficient and performance optimized technical products. The exercises are MATLAB based.
Inhalt1. Optimization modeling and theory 2. Unconstrained optimization methods 2. Constrained optimization methods - linear and non-linear 4. Direct search methods 5. Stochastic and evolutionary search methods 6. Multi-objective optimization
Skriptavailable on Moodle
327-1204-00LMaterials at Work IW4 KP4SR. Spolenak, E. Dufresne, R. Koopmans
KurzbeschreibungThis course attempts to prepare the student for a job as a materials engineer in industry. The gap between fundamental materials science and the materials engineering of products should be bridged. The focus lies on the practical application of fundamental knowledge allowing the students to experience application related materials concepts with a strong emphasis on case-study mediated learning.
LernzielTeaching goals:

to learn how materials are selected for a specific application

to understand how materials around us are produced and manufactured

to understand the value chain from raw material to application

to be exposed to state of the art technologies for processing, joining and shaping

to be exposed to industry related materials issues and the corresponding language (terminology) and skills

to create an impression of how a job in industry "works", to improve the perception of the demands of a job in industry
InhaltThis course is designed as a two semester class and the topics reflect the contents covered in both semesters.

Lectures and case studies encompass the following topics:

Strategic Materials (where do raw materials come from, who owns them, who owns the IP and can they be substituted)
Materials Selection (what is the optimal material (class) for a specific application)
Materials systems (subdivisions include all classical materials classes)
Processing
Joining (assembly)
Shaping
Materials and process scaling (from nm to m and vice versa, from mg to tons)
Sustainable materials manufacturing (cradle to cradle) Recycling (Energy recovery)

After a general part of materials selection, critical materials and materials and design four parts consisting of polymers, metals, ceramics and coatings will be addressed.

In the fall semester the focus is on the general part, polymers and alloy case studies in metals. The course is accompanied by hands-on analysis projects on everyday materials.
LiteraturManufacturing, Engineering & Technology
Serope Kalpakjian, Steven Schmid
ISBN: 978-0131489653
Voraussetzungen / BesonderesProfound knowledge in Physical Metallurgy and Polymer Basics and Polymer Technology required (These subjects are covered at the Bachelor Level by the following lectures: Metalle 1, 2; Polymere 1,2)
  •  Seite  1  von  1